Cap height + descender adjustments affect line spacing RoboFont › Forums › Help / General › Cap height + descender adjustments affect line spacing Tagged: cap height, descender value, Font Info, line spacing This topic contains 1 reply, has 2 voices, and was last updated by frederik 4 months, 2 weeks ago. Viewing 2 posts - 1 through 2 (of 2 total) Author Posts December 7, 2016 at 20:21 #6296 joshMember First-time/self-taught question… I reduced the cap-height and descender measurements from the original established in my file, redrew characters accordingly. When I test install and compare against other fonts using same size and line spacing, the line spacing of mine appears very generous. Should I be adjusting/entering cap height and descender values elsewhere to properly reflect the changes? December 10, 2016 at 14:11 #6297 frederikKeymaster Hi Josh The metrics settings in the font info panel are always related to the units per em value. If you did not change the value of units per em then the line space will increase. The ascender and descender value should match up with the units per em value, depending your design off course. good luck! Author Posts Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic.